betta breeding??????????

[Noah w]

tommorow i intended to breed my bettas. i have had them for two days but was told by the specialty store they are well fed and ready to mate.....but the female is not swallowing food she insists on spitting it out an leaving it but she is trying to eat it could thisbe because she is dfinatly full of eggs......her temp is at 78......should i not mate them and how can i get her to eat
people i know procedure i have all the stuff and i bought the previously conditioned from a specialist my question is about the feeding!!!!1

[desginrkid]

Depending if you conditioned them, bettas are difficult to mate, and the only way you woll know if she is ready is if you see vertical bars on her body, do not confuse these bard with stripes across her body, the stripes mean she is stressed, the bard however means she is ready to mate. Make sure you know what to do with all the betta fry, and that you have enough space/time/food/ect..Also before breeding bettas make sure to condition them with blood worms. And make sure the male has bluid his bubble nest.Hope this helps. Good Luck!

[Mokey41]

There's a whole lot more to breeding betta's than that. They need to be conditioned and a specific procedure followed. If you do it wrong the least that happens is no mating but the worst is your male kills the female. It isn't as simple as dumping them in a tank together.

**

[hey!! sweete]

Bettas are very picky eaters and yours just may not like the pellets.
Try some freeze dried blood worms... its the only thing I can get mine to eat! You can find them almost anywhere.
Since you only got her about 2 days ago she could still be adjusting to the new tank, and should get over it in another day or so.
Also, what size tank is he in? Does he have any decorations?
Betta need a minimum of 2.5 heated,( 76-81 F) filtered, gallons and at least a plant or two for security to stay healthy and happy.
If not, he may be depressed, and you will need to get him in the proper sized, heated filtered tank ASAP.

Things You’ll Need to reproduce the bettas

* Male and Female Betta Fish
* 10 Gallon Aquarium
* Submersible Aquarium Heater
* Aquarium Sponge Filter
* Aquarium Air Pump with Pressure Valve
* Styrofoam Cup
* Food for Baby Bettas (Fry)
* Containers for as many as 100 baby fish (deli containers work well)
* A good home for your new Bettas

1.
You will need to acquire both a male and female Betta fish. Females are often hard to find. There are several good sources online to acquire quality fish, much different then what you see at your local pet shop. Bettas ship very good, do not be afraid to have the fish shipped to you.

2.Once you have your Betta fish pair you will need to condition the fish for breeding. This is a 2 week process of feeding your Bettas high quality foods. Live food is best, but if you want to use dried foods use Frozen Bloodworms and Daphnia. Feed the fish as much as they will eat during this time.

3.During the conditioning of your Betta fish pair you will want to setup your breeding tank. Make sure your tank is clean. Washing it with very hot water is a good precaution; do not use soap to clean your tank. Add 5-6 inches of water to your tank; add your sponge filter and finally your heater. Set the heater between 80-82 degrees. Add the recommended dose of an aquarium bacteria starter and water conditioner. Turn on your sponge filter for now.

4.Next you will want to prepare the inside of the tank. Take your Styrofoam cup and cut it in half. Place the cup halve in the front corner of your tank, it should float nicely on top of the water creating a "tunnel" of air between the cup and the top of the water. Next you want to create hiding spots for your female Betta fish. Live plants are best, but fake plants will work as well. Place them on the opposite corner of the floating cup. Add you tank divider or hurricane glass away from your half cup as wel

5.After the 2 week tank and fish conditioning is complete you are ready to introduce your fish. Turn off your sponge filter at this point. Add your male Betta fish in the main tank area first. Give him a minute to look around and explore his new surroundings. Then add your female Betta into the divided part of the tank or into your hurricane glass. The female and the male MUST be separate at this point, do not add them both to the tank where they can have direct contact with either other.

6.Now you will need to judge if your Bettas are ready to breed. The male Betta should be flaring his fins out around the female and building a bubble nest, most likely under your half cup. The female will develop vertical bars on her body, this is difficult to see on lighter colored fish. The female Betta should be released at this time, normally 24-48 hours after initial introduction into the tank. It is best to release the female just before "lights out" in the tank.

7.Once your female Betta is loose in the tank the chase is on. The male Betta will chase and nip at the females fins, this can often be violent. This aggression is normal and some fin and scale damage can and likely will occur on both fish. The fish will "dance" with each other for short periods and then the male will chase the female off. If she is ready to breed she will approach the male and the nest in a head down position and generally be more interested in what he is doing. This process again can be as much as 48 hours. If the fish have not spawned in this amount of time you may want to remove the female and try another time. During this time you should attempt to not bother the fish as much as possible. You should not feed the fish while they are both in the tank together either.

8.When both parties are ready to breed the female Betta will position herself under the nest and the male Betta will wrap his body around the female. The fish will appear paralyzed for a short period of time. This embrace will be repeated several times until the female Betta has expelled all her eggs.

9.Once the fish are no longer embracing and the female has moved away from the nest she should be removed immediately. Take care not to disturb the male and his nest of eggs. Put your female in a warm quite spot to rest and recover in clean water.

10.Your male Betta will now tend to the eggs on his own for the next 24-36 hours, catching them and placing them back in the nest as they fall out.

11.After around 4 days the baby Betta fry will become free swimming and your male will be struggling to keep them all near the nest. The male should be removed at this time.

12.Once your male has been removed you can turn on your sponge filter, very lightly at first till the fry grow a little and can handle the current. You should be able to control the air flow with your valve.

13.It is now time to start feeding your tiny Betta fry. Microworms are a good first food choice. You can find live cultures online, make sure to have these ready to go before you start your breeding. Put some Microworms in a cup of w

[Emma C]

Give her some flakes! That helps! I would breed them though